![]() ![]() ![]() The target X-dimension recommended for the GS1-128 barcode symbol is 0.495 mm (0.0195'). 0254 CM) with an X to Y ratio (or N Dimension) of 5. If you use a fine screen to deliver more ink to the substrate, be sure there are no voids in the print caused by the screen not adequately filling in. The X-dimension is the specified width of the narrowest element in a barcode symbol.If you use multiple layers of ink to increase the background opacity, each layer should be printed as a solid colour.However, if the symbol background is printed beneath the bars, the background should be printed as solid line colours. This means they must be at least 0.0936 inches for the minimum x-dimension and at least 0.234 inches for the maximum X-dimension. In many cases the symbol background is not printed and the colour of the packaging substrate is used as barcode background.Several of these barcode properties are also used for DataBar and 2D barcode types. Below is a summary of the size limits defined for carriers EAN-8, EAN-13, ITF-14 och GS1-128 in the GS1 General Specifications. Given the fact that most barcode scanners use a red-light source, you can quickly see why these colours may be suitable for backgrounds but should be avoided for bars. The chart below explains a variety of common properties for linear barcode types. You will have to either assign a greater value to BarcodeWidth or set X dimension smaller. NET Suite will generate a valid Code 39 image with the minimum barcode width. Specifies the wide-to-narrow element ratio of the barcode. Opens the Barcode X Dimension dialog, where you can find the advanced X dimension settings. Used with all symbologies except US Postnet. This is also true of similar colours such as orange, pink, peach, and light yellows. Thus if the barcode width you are trying to set is less than that minimum value, this value will be considered to be invalid. Specifies the width of the narrowest unit in a barcode usually, this is the width of the narrowest bar or space. If you have ever been in a darkroom with red lighting and tried to read red copy, you know it can virtually disappear. ![]() In addition to light backgrounds, “reddish” colours may also be used.GS1 barcodes require light backgrounds for the Quiet Zones (area free of printing around the barcode) and spaces (e.g., white). ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |